Jansincere Different Size Medium Density Ceramic Proppant for Oil Wells
Ceramic Oil Proppant
The cerami proppant is characterized with high crush strength, good abrasive resistance to brace the manual rip effectively, low density, easy for injection into oil well, not easy to occur the chemical reaction with fracturing fluid and reservoir fluid under the condition of temperature 200℃.
Technical Index
| Detecting Parameter | Q/SY5108-2006 Standard Request | Product Index |
| Type | Medium Density Ceramsite | Medium Density Ceramsite |
| Specification,μm | 850～425(20/40) | 20/40 |
| Bulk Density ,g/m³ | 1.65-1.80 | 1.75 |
| Apparent Density,g/m³ | 3.00-3.35 | 3.20 |
| Crushing Rate,% | 52MPa | ≤5.0 | ≤5.0 |
| 69MPa | ≤7.0 | ≤7.0 |
| Roundness | >0.8 | 0.9 |
| Sphericity | >0.8 | 0.9 |
| Acid Solubility,% | ≤8.0 | 6.5 |
FAQ
1. When Jansincere Company established?
In 1986.
2. How many staffs in your factory?
About 500, including including 23 managers, 42 technicians, and 8 qualified installation engineers.
3. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
4. Do you provide samples?
Standard size sample is free, but the air freight is collect or you pay us the cost in advance.
