High Thermal Conductivity 30-50 Mesh Ceramic Proppant for Mechanical Equipment
Ceramic Proppant Introduction:
Ceramic proppant is easy for injection into oil well, not easy to occur the chemical reaction with fracturing fluid and reservoir fluid under the condition of temperature 200℃.
Ceramic proppant has the feature of high crush strength, good abrasive resistance to brace the manual rip effectively, low density.
Ceramic Proppant Technical Index:
| Detecting Parameter |
Q/SY5108-2006 Standard Request |
Product Index |
| Type |
Medium Density Ceramsite |
Medium Density Ceramsite |
| Specification,μm |
850～425(20/40) |
20/40 |
| Bulk Density ,g/m³ |
1.65-1.80 |
1.75 |
| Apparent Density,g/m³ |
3.00-3.35 |
3.20 |
| Crushing Rate,% |
52MPa |
≤5.0 |
≤5.0 |
| 69MPa |
≤7.0 |
≤7.0 |
| Roundness |
>0.8 |
0.9 |
| Sphericity |
>0.8 |
0.9 |
| Acid Solubility,% |
≤8.0 |
6.5 |
FAQ:
1. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
2. Do you provide samples?
Standard size sample is free, but the air freight is collect or you pay us the cost in advance.
