
Add to Cart
Introduction:
Anti-alkali brick is made of silica, flint clay, combing with other additives reacting with alkaline oxide and efficiently stopping the alkaline slags into the bricks, to achieve the alkali resistance.
Feature:
Bulk density stability
Good anti-erosion character
Superior penetration resistance.
Good slag resistant
Application:
Alkali-resisting bricks are widely used in the cement kilns, such as the areas of preheater, precalciner, and tertiary air duct elbow, ect. The demand amount can be max 30~40% during constructing these areas of kilns.
Index:
Item | High Stength Alkali-Resistant Brick | |
Chemical Composition(%)
| Al2O3 | 25—40 |
SiO2 | 65-70 | |
Fe2O3 | ≤2.0 | |
Refractoriness(℃) | ≥1650 | |
Volume Density(g/cm3) | ≥2.20 | |
Apparent Porosity(%) | ≤20 | |
Cold Crushing Strength(MPa) | ≥60 | |
Refractoriness Under Load (0.2MPa T0.6,℃) | ≥1300 | |
Thermal Conductivity Coefficient (w/m.k) | ≤1.28 | |
Thermal shock resistance,Cycles(1100℃,Water-cooling) | ≥20 |