High Temperature Volume Stability Silicon Carbide Refractory Bricks for Kiln Furnace
Silicon carbide brick introduction:
The refractory material made of SiC as the main raw material. Containing SiC 72% ~ 99%. It is divided into clay, Si3N4, Sialon, β-SiC, Si2ON2, and recrystallized.
Silicon carbide brick has the feature of high thermal conductivity, good wear resistance, thermal shock resistance, corrosion resistance.
Silicon carbide brick an be used for ceramic kiln furniture, large and medium-sized blast furnace body bottom, furnace waist and furnace belly, aluminum refining furnace lining, zinc distillation tank lining.
Technical Index:
| Item |
Silicon Carbide Brick |
| CH-10 |
| Chemical Composition % |
Al2O3 |
≥10 |
| SiC |
≥80 |
| Bulk Density g/cm3 |
≥2.70 |
| Apparent Porosity % |
≤13 |
| Cold Crushing Strength Mpa |
≥120 |
|
Thermal Shock Resistance, Cycles
( 1100℃,Water cooling)
|
≥20 |
| Refractoriness Under Load ℃ |
≥1700 |
Company Profile:
| Establish Year |
1986 |
| Factory Area |
135,000 square meters |
| Certification |
ISO9001, ISO14001, OHSAS18001 |
| Main Products |
Dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory |
| Fields of Application |
Glass industry, aluminium industry, cement and lime industry, ceramic industry, chemistry and petrochemistry, waste incinerators, iron and steel industry, power and heat stations, chimney pipes, fireplaces& stoves |
|
Production lines
|
3 production lines
|
FAQ:
1. When Jansincere Company established?
In 1986.
2. How many staffs in your factory?
About 500, including including 23 managers, 42 technicians, and 8 qualified installation engineers.
3. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
