Heat Resistant Bricks Good Thermal Stablity Silicon Carbide Brick for Kiln Furnace
Silicon carbide brick introduction:
Silicon carbide refractory bricks are made with SiC as the main raw material. Contains SiC 72% to 99%. The silicon carbide brick has high thermal conductivity and good wear resistance, thermal shock resistance and corrosion resistance.
Silicon carbide brick application:
Silicon carbide refractory bricks are used for lining of aluminum electrolytic cell, kiln for melting aluminum pipe and ceramic kiln, lower part of large and medium sized blast furnace body, furnace waist and belly, aluminum refining furnace lining, zinc distillation tank lining, etc.
Technical Index:
| Item |
Silicon Carbide Brick |
| CH-10 |
| Chemical Composition % |
Al2O3 |
≥10 |
| SiC |
≥80 |
| Bulk Density g/cm3 |
≥2.70 |
| Apparent Porosity % |
≤13 |
| Cold Crushing Strength Mpa |
≥120 |
|
Thermal Shock Resistance, Cycles
( 1100℃,Water cooling)
|
≥20 |
| Refractoriness Under Load ℃ |
≥1700 |
FAQ:
1. When Jansincere Company established?
In 1986.
2. How many staffs in your factory?
About 500, including including 23 managers, 42 technicians, and 8 qualified installation engineers.
3. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
